help, bomber bindings

[shantz24]

ok, call me a complete idiot or whatever, cuz i feel pretty dumb right now. but i just got my bomber elite extra long bindings, THANKS G, and i cant seem to figure them out, they are adjusted to my boot size. and i think i need to put the disk under the binding and use the longer screws, right? but what do i do with the 4 bumpers? i thought there would be 4 for each binding. please help a fellow boarder out so i can try these babies out tonite!! thanks!

oh and one more thing, on skiboards.com the bomber elite extra long bindings are advertised to fit up to size 15 boot. and i was worried they might not fit, but i have size 15, 359 mm, boots and they are plenty big enough, they are on the middle hole on each end. so they would fit a much larger ski boot than i expected. so anyone with big feet out there, all hope is not lost for skiboarding. although it is near impossible to find a size 15 ski boot. i only found one company that even makes them.

~Ride on~

[C.Langer]

yeah ... the disc goes inbetween the binding and board. u need four bumpers total ... 1 for the toe and 1 for the heel of each binding. there should be a small pin or screw under the binding that goes through the middle of the bumper and holds it in place when bindings are attached to the boards ... again, 1 at the toe and 1 at the heel.

[Greco]

make 'em look like this:

http://www.skiboardsonline.com/Merchant2/graphics/bomber/bomber_elite.gif

if you need help give a call when you have the stuff in front of you.

http://www.skiboardsonline.com/html/contact.htm

-G

[shantz24]

thanks guys, i just got back from our little hill, i only got to make a few runs but its awesome!