PDA

View Full Version : line reactor releaseable bindings


jungolaya
03-18-2004, 02:23 PM
so what's the scoop on these? heard that they're coming out next season...
Roussel
03-18-2004, 04:41 PM
they might have the 4 x 4 mounting patterns, if they do then you could mount them on skiboards!
Vitulla
03-19-2004, 08:45 AM
get spruce risers, they are GREAT. www.skiboardreview.com
jungolaya
03-19-2004, 09:09 AM
i already have the risers actually, on my canon pros...thanks to SBOL. just read a blip about these bindings somewhere and was wondering if anyone knew more about it. it looks like it does have the 4x4 setup.
bailey
03-19-2004, 04:26 PM
next year the skiboards will come with the 4 hole pattern to match the rector binding. should be waaay better than what they currently, but also waaay more expensive
jsinger
03-22-2004, 10:33 PM
The Reactor binding was designed primarily for Line twin tip skis. In order to prevent people from mounting standard 4x4 non-release skiboard bindings on these skis, the hole pattern in the Reactor binding is actually 38x40 millimeters rather than 40x40. This means that the binding will only mount on new Line skiboards (model year '04/'05).

Spruce Mountain has been asked to look into developing adaptor plates that would allow the Reactor binding to be mounted on standard 4x4 mount skiboards and allow standard 4x4 bindings to be mounted on the new Line boards.

We'll keep you up to date on developments.