!ATTENTION SHOPPERS!

SBOL will be closed from June 29th to July 28th. Orders placed during this time will be shipped on July 30th.
Note: Orders for Spruce longboards with no bindings CAN be filled during this period.

Page 1 of 2 12 LastLast
Results 1 to 15 of 21
  1. #1 Full Tilt Booter, Stock Zero Binding - A Backcountry Review and Trip Report 
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    There has been some confusion about my comments about the touring binding application that has been developed for non release skiboard bindings. Some folks are getting the impression that I think the binding is lacking or prone to pre release or needs further development. On the contrary .. yes I am a perfectionist and I want this binding to do everything ... but no I do not think skiboarders need to wait for the development of the perfect touring binding .. you can go out right now and have a magnificent time at very low cost .. I have tried snowshoes.... they are ok , but the touring binding is better... I have tried the Fritschi binding and telemark bindings and they have had a long development time and work well.. but nothing , absolutely nothing beats the pure joy I have had this season on a pure and simple skiboard solution to backcountry touring . Skiboarding is all about simplicity and the touring binding is all that .. , Today I was on Full Tilt booters , and stock Zero skiboard binding rigged with a simple telemark cable binding and skins and having the time of my life .. Will I use Fritschis again? , no , will I use snowshoes ,no ? , will I use telemark bindings no.?. I am a skiboarder and I will use skiboard bindings rigged with simple touring cables and skins to access the goods. Proud of the simplicity , and proud of the versatility that my skiboards and skiboard bindings provide ..

    But I am getting ahead of myself ... let's go get the goods ... a foot of fresh pow 2 days ago ... my buddy Billy and myself go get the goods today ... untracked snow and no people 2 days after a storm .. the ski areas are a zoo yesterday and today ... no way are we going there ... this is why we are here !

    Billy breaking trail on his Hagan 130 's


    On the trail , me with a view of Pyramid peak in the background .. Billy and I have climbed that mountain and descended it in the past .. maybe some other day ...today we have found paradise in the trees...



    Silence , nobody else here , new pow , blue bird sky ... I am a very happy man ... not the least because I am here on skiboards ,on sweet Full tilt boots , my Condors, my standard skiboard bindings.. , skins and vapor light telemark cables , a total low weight rig , that serves all my needs ,better then anything I have every used in the backcountry ..



    Transitions are a piece of cake . snap off my telemark cables , reverse my skiboards so the heel piece which used to be the toe piece , is now the heel piece, lock in and strip off skins ...



    Locked and loaded and ready to shred some pow ... oh better put on my helmet ! ! the Revel8 stickers willl give me good luck !



    Here is some vid of Billy and I having fun in the pow ... Magic day .. !



    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  2. #2  
    Hardcore Skiboarder koneco's Avatar
    Join Date
    Jan 2010
    Location
    Burlington, VT
    Age
    34
    Posts
    569
    Rep Power
    10
    Amazing place you got there. Here, we've got rain, wind, and in a few days, mid-50 degree weather.
    Reply With Quote  
     

  3. #3 Oh I got so excited I forgot the review! 
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    Full tilt booter
    Perfect backcountry skiboard boot ... extremely light weight , I removed the rear forward lean plastic piece so could have a more upright stance... leave all the buckles undone for climbing nice and comfy for the climb ..
    lock all the buckles for the descent and have full on ski area boot control for the descent ... just the perfect backcountry boot !

    zero stock binding ..

    The zero has a very large diameter heel bale and lets me use the heel bale as a toe bale for the Full tilts ... it also will fit any other downhill ski boots as a toe bale .. using the heel bale as a toe bale is a stroke of genius suggested by Skafreak and helps to prevent premature release of the binding and also puts the climber in a front ward position ( if you use a set back as I do ) .. the front ward position was magic for trail breaking ....

    also the Zero front bales / front lever, can be used nicely as heel elevators and help also as heel locators and help to prevent torqueing of the boot when pared with telemark cables


    Here is a pic of the Full tilts in the Zero binding locked with telemark cables and the zero front bale used as a heel lift .


    By changing the positon of the front bale you have two positions of heel lift


    Here is a detail pic of the zero front bale in high position heel elevator mode


    and in low position heel elevator mode



    Skiboards RULE in the backcountry ... set up your own touring set up and go get some !!!!
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  4. #4  
    Hardcore Skiboarder slow's Avatar
    Join Date
    Mar 2005
    Location
    Winnipeg, Canada
    Age
    60
    Posts
    3,461
    Rep Power
    20
    Quote Originally Posted by jjue View Post
    zero stock binding ..

    The zero has a very large diameter heel bale and lets me use the heel bale as a toe bale for the Full tilts ... it also will fit any other downhill ski boots as a toe bale .. using the heel bale as a toe bale is a stroke of genius suggested by Skafreak and helps to prevent premature release of the binding and also puts the climber in a front ward position ( if you use a set back as I do ) .. the front ward position was magic for trail breaking ....

    also the Zero heel bales can be used nicely as heel elevators and help also as heel locators and help to prevent torqueing of the boot when pared with telemark cables
    Hi Jack,

    Thanks for clarifying. It was getting confusing trying to keep up with the developments.

    Do the receptors also allow the use of the heel bale as the a toe bale with your FT boots?


    Osprey, Sherpa, Custom Coda 120WT, Custom DS110, Condor (Green), Spliff

    Custom Twist Out duck foot bindings, Bombers (custom duck foot base plate and 3 pads), releasable S810ti on custom duck foot riser

    Nordica N3 NXT ski boots (best so far)


    Wife: 104 SII & 100 Blunt XL with S810ti bindings on custom "adjustable duck foot" risers

    Loaners: 125LE, 105 EMP, 101 KTP, 100 Blunt XL, 98 Slapdash, 88 Blunts
    Reply With Quote  
     

  5. #5  
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    Quote Originally Posted by slow View Post
    Hi Jack,

    Thanks for clarifying. It was getting confusing trying to keep up with the developments.

    Do the receptors also allow the use of the heel bale as the a toe bale with your FT boots?
    the receptor heel bale is too small to be used as a toe bale for any ski boots ...
    i used a line ff pro heel bale in the receptor binding it fits all regular ski boots as a toe bale except for the Full tilt ..
    the only current standard heel bale that can be used as a toe bale for Full tilt boots are the Zeros which have a very wide heel bale ....
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  6. #6  
    Hardcore Skiboarder slow's Avatar
    Join Date
    Mar 2005
    Location
    Winnipeg, Canada
    Age
    60
    Posts
    3,461
    Rep Power
    20
    Thanks for sorting that out. I did not realize that you had a ff pro bale on the Receptor.


    Osprey, Sherpa, Custom Coda 120WT, Custom DS110, Condor (Green), Spliff

    Custom Twist Out duck foot bindings, Bombers (custom duck foot base plate and 3 pads), releasable S810ti on custom duck foot riser

    Nordica N3 NXT ski boots (best so far)


    Wife: 104 SII & 100 Blunt XL with S810ti bindings on custom "adjustable duck foot" risers

    Loaners: 125LE, 105 EMP, 101 KTP, 100 Blunt XL, 98 Slapdash, 88 Blunts
    Reply With Quote  
     

  7. #7  
    Hardcore Skiboarder valmorel's Avatar
    Join Date
    Feb 2004
    Location
    uk
    Posts
    3,360
    Rep Power
    21
    Snow depth looks like about the same as our Mount Rose day? Perfect. Hoping my Condors will arrive in the next few days, then I will be chasing you Jack!
    Sticky Icky Icky (go to dream board)
    Most everything else over time.
    Go Android
    Reply With Quote  
     

  8. #8  
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    Quote Originally Posted by valmorel View Post
    Snow depth looks like about the same as our Mount Rose day? Perfect. Hoping my Condors will arrive in the next few days, then I will be chasing you Jack!
    Yes . Valmorel .. speed through the snow was about the same as Mt Rose day ... interesteing this thing about snow ... we had a storm 2 days before , pretty much similar to the storm we had before our shredfest backcountry day , , , but the snow had had time to set up , so was denser then the shredfest backcountry day and provided more support and more speed . lots of fun ! you will love those Condors , Valmorel , they are crazy fun , especially in pow and junk and crud ... and not bad on the groomers as well ....
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  9. #9  
    Hardcore Skiboarder valmorel's Avatar
    Join Date
    Feb 2004
    Location
    uk
    Posts
    3,360
    Rep Power
    21
    Quote Originally Posted by jjue View Post
    you will love those Condors , Valmorel , they are crazy fun , especially in pow and junk and crud ... and not bad on the groomers as well ....
    Condors reached UK. Just waiting to hear they have reached local depot (probably tomorrow). Provisionally booked Xscape for Sunday.
    Sticky Icky Icky (go to dream board)
    Most everything else over time.
    Go Android
    Reply With Quote  
     

  10. #10 Tweaking the Zero touring binding 
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    For those using the Zero as the base binding for touring applications here are a couple of simple suggestions to improve touring function

    1/ i use a small piece of thin rubber sheeting in the heel bale slot to allow the heel bale to stand up by itself .. this is really useful in transitions where it is easier getting into heel bale when used as a toe bale for touring , or used as a heel bale in the descent..




    2/ I install a wood screw just in front of the front lever of the binding , this allows the front lever not to be kicked down while climbing and allows the lever to stay in place well as a climbing bar in the low position .. in the high position the lever is braced by the serrations in the front bale binding base plate .



    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  11. #11 Comparison Kong Grimper binding vs Touring Skiboard binding 
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    A couple of proprietary skiboard touring bindings have been developed ... which are based on the principle of a non release skiboard binding mounted on free pivoting base plate , the base plate is moved forward for climbing and then backwards for descent ..

    Here is a diagram of the Kong Grimper system


    Here is a description of how it works . ...


    Instructions


    1.
    Fix your boot onto the binding, locking it by the plate B. Warning: do not over tight the plate because it may cause a bending.

    2.
    To climbing a gentle slope, loosen the screw A and move the binding to the front end, then lock again the screw. In this case, the steel tip C is kept in the closed position.


    3.
    Climbing a steep slope, you may open the stainless steel tip C. The tip will lean against the nylon plate D fixed on the ski.

    4.
    Willing to lock the heel during the descent, loosen the screw A and move the binding to the back end, blocking it into the grip E.

    The really cool thing about the idea of reversing a regular skiboard binding with a set back and using the heel bale as a toe bale , is that we accomplish the same thing as a moveable plate binding just by turning our skiboard around during transitions . In climbing position we are forward on the skiboard and for descent we are set back .Also we can press in to service different parts of the regular skiboard binding for different roles.. Such as the use of the front lever as a climbing assist heel elevator . It is really a unique feature of the design of regular non release skiboard bindings to allow this type of touring binding without the need to buy a proprietary binding system and is a special feature of a skiboarding as a winter mountaineering sport.
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  12. #12 Past and present 
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    The use of short skis and skiboards in the backcountry amongst climbers has a long history Lowell Skoog was one of the pioneers ... here is a recent thread amongst cascade climbers with pics ... The only problem with the Condor/Zero set up , is that the use of the heel bale as a toe bale cannot be used with standard mountaineering boots because of the width of mountaineering boot toes .. it could be used however , in my original design with the front bale used as the front bale for touring applications ...

    http://cascadeclimbers.com/forum/ubb...escent_skis_fi

    Standard skiboard bindings could be used with the heel bale as a toe bale for mountaineering type boots by fashioning some wider heel bales .. the size of the skiboard would be the limiting factor as to which boots could be used to drive what skiboards.. in my experience standard plastic mountaineering boots would be too soft to drive a real big skiboard like the Condor ..
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  13. #13  
    Hardcore Skiboarder slow's Avatar
    Join Date
    Mar 2005
    Location
    Winnipeg, Canada
    Age
    60
    Posts
    3,461
    Rep Power
    20
    So why do mountaineering boots have a wide toe?


    Osprey, Sherpa, Custom Coda 120WT, Custom DS110, Condor (Green), Spliff

    Custom Twist Out duck foot bindings, Bombers (custom duck foot base plate and 3 pads), releasable S810ti on custom duck foot riser

    Nordica N3 NXT ski boots (best so far)


    Wife: 104 SII & 100 Blunt XL with S810ti bindings on custom "adjustable duck foot" risers

    Loaners: 125LE, 105 EMP, 101 KTP, 100 Blunt XL, 98 Slapdash, 88 Blunts
    Reply With Quote  
     

  14. #14  
    Hardcore Skiboarder jjue's Avatar
    Join Date
    Feb 2006
    Location
    northern california
    Age
    67
    Posts
    4,402
    Rep Power
    21
    Quote Originally Posted by slow View Post
    So why do mountaineering boots have a wide toe?
    alpine touring boots, mountaineering boots , are constructed more like hiking boots with a wider toe box then regular ski boots which have a narrower last in the front ... i assume that regular ski boots are constructed that way because of the narrow din standard front sole .. .and the other boots are constructed more like regular shoes ..
    Boards :
    Blunt Xls -SBOL Modified GNU Rear Entry Snowboard Bindings
    Rockered Condors- SBOL Modified Sims Cipher Snowboard Bindings
    Rockered Condors - Backcountry modified RVL8 Receptor Binding -
    Spliffs -Backcountry modified RVL8 Receptor binding
    Spruce Osprey - Center Mounted with Spruce Backcountry riser/ Ambition AT binding
    Spruce Sherpa - Rear Mounted with Spruce Backcountry riser/ Fritschi AT binding

    Boots:
    Ride Insano Snowboard Boots
    Full Tilt Booters
    Reply With Quote  
     

  15. #15  
    Hardcore Skiboarder Bill's Avatar
    Join Date
    Jan 2007
    Location
    Missouri
    Age
    60
    Posts
    1,547
    Rep Power
    15
    Quote Originally Posted by jjue View Post
    the receptor heel bale is too small to be used as a toe bale for any ski boots ...
    i used a line ff pro heel bale in the receptor binding it fits all regular ski boots as a toe bale except for the Full tilt ..
    the only current standard heel bale that can be used as a toe bale for Full tilt boots are the Zeros which have a very wide heel bale ....
    Jack, do you find that the wider, larger-radius heel bales on the zeros hold securely enough...without side-to-side play...as toe and/or heel bales?

    If you take a look at the pictures of skyskater's bindings, he uses a straight rod as a heel bale which would be the ultimate "fit-anything" bale but I imagine might have too much side-play or not enough contact area for your demanding application? I've been playing with custom bale configurations and trying to figure out a solution.
    Reply With Quote  
     

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin®, Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Tabs System by vbSoporte - vBulletin en Espaņol