Which Spruce risers and release bindings should I choose?
|
Who Should buy Pro Prime Plus Risers/Bindings?
-
Riders who weigh more than 79lbs (36kg).
-
Riders who want the strongest possible binding combined with moderate weight and maximum safety.
-
Riders who wish to ride with brakes on all width skiboards.
-
Riders who want a very high maximum DIN setting - 12.
-
Riders who have a higher-end budget.
-
Note: All Spruce risers/bindings come with a 5yr warranty.
|


Pro Prime Plus
|
Who Should buy Pro Prime Risers/Bindings?
-
Riders who weigh more than 67lbs (31kg).
-
Riders who want the lightest possible riser/binding combined with a high maximum DIN setting - 11.
-
Riders who have a moderate to higher-end budget.
-
Riders who wish to ride with brakes on all width skiboards except Revel8
KTP & Condor.
-
Note: All Spruce risers/bindings come with a 5yr warranty.
|

Pro Prime
|
Who Should buy Pro Lite Risers/Bindings?
-
Riders who weigh more than 67lbs (31kg).
-
Riders who want the lightest possible riser/binding combined with a high maximum DIN setting and the widest possible brakes.
-
Riders who want leading-edge graphics & colors on their bindings.
-
Riders who have a moderate to higher-end budget.
-
Riders who wish to be able to ride with brakes on all width skiboards.
-
Note: All Spruce risers/bindings come with a 5yr warranty.
|
|
Who Should buy Pro Sport Risers/Bindings?
-
Riders who weigh more than 67lbs (31kg).
-
Riders who are comfortable with a maximum DIN setting of 10.
-
Riders who have a moderate budget but want a rugged high quality binding.
-
Note: All Spruce risers/bindings come with a 5yr warranty.
|

Pro Sport
|
Who Should buy Pro Jr. Risers/Bindings?
-
Riders in the weight range of 48 (22kg) to 187 lbs (84kg).
-
Riders who will never need a maximum DIN setting greater than 7.5
-
Riders who have a limited budget but want a high quality product with high performance.
-
Note: All Spruce risers/bindings come with a 5yr warranty.
|

Pro Jr.
|
Spruce risers and bindings are shipped separately(except for international orders), direct from Spruce.
Attaching
Spruce
risers to any pair of 4x4 skiboards is very simple, requiring just a screwdriver.
Before using Spruce risers/bindings, they must be adjusted and tested, w/ the rider's actual boots,
by a certified binding technician. (almost all ski shops will perform this service for little or no charge) |