What is a dry-fire?
A dry-fire is the term used to describe the act of stretching out a bungee and releasing it with no rider. This process can cause severe cosmetic damage to the ride-handle (as it slams into its anchor point). It can also super-heat the bungee’s rubber, causing the molecular structure of the product to change. This may lead to bungee’s stretching out and not recoiling back to their original position. It is important to note that repeated dry-firing is the number one cause of product malfunction, so avoid it at all costs.

2. How fast do Banshee Bungee’s sling you?
A 10ft Banshee Bungee Youth Package has a top speed of around 12mph, the 10ft package around 20mph, and the 20ft around 35 mph.

3. What is the quick release?
The Banshee Bungee Quick Release is a system that is used to hold a fully stretched bungee in place for a small period of time while the rider straps in, camera crews get ready, and final adjustments are made. The metal clip attaches to the metal eye on the handle, and is released by pulling the red tab.

4. How many people does it take to use a Banshee Bungee?
Typically it only takes 1-2 people to use the 10ft Banshee Bungee Youth Package and 10ft models. For the 20ft, it is recommended that 2-3 people help stretch it.

5. What is the warranty on Banshee Bungee products?
Since bungee’s are made of natural latex , they do deteriorate over time. A rider should get between 1,000-1,500 pulls out of a banshee bungee. With the right care and conditioning, this number can be extended; your Owner’s Manual has all of the Care and Conditioning Instructions. While we do not have a written warranty policy, Banshee Bungee representatives judges each warranty issue on a case-by-case basis. If the product has malfunctioned within a short period of time after purchase due to an error in manufacturing it will be replaced. Other situations will be handled accordingly with the ultimate goal of customer satisfaction in mind.

6. How do I care for a Banshee Bungee properly?
Care Instructions are included in the Operators Manual that comes with every BoardBungee Package, but here’s a quick rundown.

• Prior to first use, submerge the Bungee cord in fresh water and stretch the cord to remove any impurities between the braids. Dry thoroughly after.
• Inspect the BoardBungee before (and after) each use for any damage and do not use if there appears to be any damage or breakage.
• Rinse the Bungee in fresh water after each use, especially after use in salt water (salt buildup will damage the latex) and sprinkle evenly with Talcum Powder to absorb moisture and lubricate the braids.

For long-term storage, place the Bungee in a paper bag and seal that in a Ziplock-type Freezer Bag after removing all the air. Store the bag containing the Bungee in a Freezer to slow the aging of the latex and prevent rot.