Like this product ? Help spread the word:


The 2017 RVL8 104cm Sticky Icky Icky skiboards takes its cues from last season’s Spliff but is geared more toward riders who unfortunately are facing less powder in their skiboarding adventures. It’s more narrow than the Spliff with a width profile of 13.0/10.6/13.0cm vs. the Spliff’s 15.5/13.0/15.5cm profile. It also has a little less camber and rocker making it ideal for hard pack and variable conditions. The 2mm by 80cm static rocker is just enough to help you plow through any crud or small powder stashes but not enough to cause you to sacrifice hard pack and icy terrain performance. A new design feature never before seen on a pair of skiboards over 101cm is an extra set of inserts designed specifically to allow you to set back your Spruce risers for when you find yourself in the lucky situation of an overnight 3 foot powder dump and need some help keeping your tips up.SII Inserts Explained Thanks goes to Jason Roussel and the Forum for this feature. (Unfortunately, do to liability concerns, the inserts are only designed to allow the releasable Spruce riser system to be set back, the extra inserts are not compatible with non-release bindings. See the 101cm RVL8 KTP which has this feature)

Here are the first comments from RVL8 prototype skiboard tester Dave Stevens – “Sticky Icky Icky First Impressions”

Minimum rider height for best performance with:RVL8 104cm Sticky Icky Icky Skiboards on grass
Non release bindings is 5’7″ (175.26cm)
Release bindings is 5’3″ (162.56cm)

Width profile –13.0/10.6/13.0cm
Rocker profile – 2mm/8cm tip/tail
Camber – 5mm
No setback: use 4×4 inserts
3cm setback: use 4×10 inserts

All RVL8 skiboards feature the best ingredients available:

  • 4×4 and 4×10 inserts (4×10 inserts allow 3cm setback; Spruce risers only)
  • ABS Sidewalls
  • Signature RVL8 Blunt Tips and Tails RVL8 104cm Sticky Icky Icky Skiboards (bases) on grassTip to Tail Dual Carbon Fiber Beams
  • Stainless Steel 4cm x 4cm Binding Inserts
  • Laminated Poplar Wood Core
  • ISOSPEED Sintered 7500 Race Base
  • 2 layers of Bi-Axial Fiberglass
  • Full Perimeter Rockwell 48 Steel Edges
  • Rubber Foil Dampening
  • Dye Sublimated Topsheet
  • Silkscreened Base Graphics
  • Full 1 Year Manufacturer Warranty

RVL8 Rockered Skiboard Comparison Graphic - 2016


There are no reviews yet.

Be the first to review “RVL8 2017 Cambered/Rockered Sticky Icky Icky 104cm Skiboards”

Your email address will not be published. Required fields are marked *

Additional information

Weight 5.50 lbs

RVL8 2017 Cambered/Rockered Sticky Icky Icky 104cm Skiboards

This product is SOLD OUT